Skip to content
Plumbing VernonHartford, CT plumbersAnswered 24/7(860) 926-8723

Boilers & specialty

Backflow testing and repair in Hartford, CT

A backflow preventer keeps irrigation water, boiler chemicals and other contaminants from flowing back into the drinking water supply. Many devices need periodic testing to prove they still work.

  • Answered 24/7
  • Price before work
  • Hartford + nearby towns
brass reduced pressure backflow assembly with test cocks and a differential pressure gauge attached in a mechanical room
Typical range $95 to $685(860) 926-8723Price confirmed on site before work starts
Quick answer

Backflow testing checks a backflow prevention assembly with a test kit to confirm its check valves and relief valve hold, then records results for the water utility. Typical Hartford-area costs run about $95 to $685 including common repairs. We answer 24/7, schedule tests around your deadline and quote any repair price before work starts.

Signs you need backflow testing

  • Your water utility sent a notice that a backflow test is due
  • Water drips or sprays from the relief port on the backflow device
  • You added irrigation, a fire sprinkler line or a boiler feed recently
  • Your business has equipment tied to the water supply, like a soda fountain
  • The backflow device has not been tested since it was installed

What backflow is and why it matters

Backflow happens when water flows the wrong way into the public supply. Back-siphonage occurs when supply pressure drops, such as during a main break or fire hydrant use, and pulls water from a hose or tank back into the line. Backpressure occurs when a system on the property, like a boiler or pump, pushes water at higher pressure than the supply.

Backflow preventers stop this with spring-loaded check valves and, on some assemblies, a relief valve that dumps water before it can flow backward. Utilities require devices where a property has a cross connection with risk, such as irrigation, boilers with chemical treatment, fire sprinklers and commercial equipment. The required device type depends on the hazard.

How the test is done

Testable assemblies have test cocks and shut-off valves. The tester connects a differential pressure gauge to the test cocks, closes valves in sequence and checks that each check valve holds the right pressure difference and that the relief valve opens at the correct point. The results are recorded in the format the water utility accepts, with the device serial number and location.

A test typically takes less than an hour per device. Water is shut off briefly during the test, so we schedule it at a time that works for a home or business. If the device fails, we explain which part failed and what it costs to repair, and we retest after the repair so passing results can go to the utility.

Repairs and replacement

Most failures come from worn rubber parts in the check valves or relief valve, or from debris such as sand or pipe scale stuck on a valve seat after street work. Rebuild kits replace the discs, seats and springs, and a rebuilt device often tests fine right after the rebuild. Frozen or cracked bodies, a common problem when outdoor devices are not drained before winter, cannot be rebuilt and need replacement.

Outdoor irrigation backflow devices should be shut off, drained and protected before freezing weather, with the test cocks opened so trapped water can escape. A relief valve dumping water constantly may mean a fouled first check valve or a pressure fluctuation on the supply side. We troubleshoot and repair the actual cause rather than replacing a working device unnecessarily, and we show you how to winterize it yourself.

inspector looking at exposed basement plumbing with a flashlight and clipboard

Around Hartford

What we see in local homes

The MDC provides water to Hartford and its member towns and requires backflow protection where a cross connection poses a risk. Common devices we see include irrigation systems in West Hartford and Glastonbury, boiler feeds in older multi-family buildings and equipment in small storefronts and restaurants. Cold winters crack outdoor devices that are not drained, so spring testing often finds freeze damage.

What it usually costs

$95 to $685

Device type and size, access and whether parts or a full replacement are needed move the price. Typical Hartford-area range, confirmed on site before work starts. Compare all prices.

Process

How we handle backflow testing

  1. 1

    Schedule the test

    Call (860) 926-8723 with your utility notice or device location and pick a time.

  2. 2

    Test the assembly

    We connect the test kit, check each valve and record the results.

  3. 3

    Repair if it fails

    We explain the failure and quote the repair before work starts, then rebuild or replace.

  4. 4

    Retest and report

    We retest after repairs, complete the paperwork and leave the area clean.

FAQ

Backflow Testing questions

Testing frequency is set by the water utility and depends on the device and the hazard. Many testable assemblies are checked at least once a year. If you receive a notice from the MDC or your water provider, it will show the device and the deadline. We schedule the test and handle the paperwork.

We explain which part failed, usually a check valve or relief valve, and quote the repair before work starts. Most failures can be fixed with a rebuild kit. After the repair, we retest the device so you have passing results to send to the utility.

Irrigation systems usually need a backflow preventer because they connect drinking water to lawns, soil and fertilizer. Testable devices typically need periodic testing according to the utility's rules, often once a year. Draining the device and opening its test cocks before winter helps prevent the freeze damage that causes so many test failures in spring.

Related work

Often booked together

Commercial Plumbing

When a restroom backs up during business hours or the water heater dies before the lunch rush, every hour costs money. Small businesses need plumbing repairs...

Learn more

Home Plumbing Inspection

Before you buy an older house, or after you have lived in one for years, it helps to know what is behind the walls. A plumbing inspection tells you what is...

Learn more

We do backflow testing in these areas too

Need backflow testing today?

A plumber answers, day or night, and gives you a price before any work starts.

Call (860) 926-8723
Plumber on the line 24/7 Call (860) 926-8723