Cold or banging radiators
Steam radiators with failed air vents or poor pitch stay cold, hiss or bang as the boiler fires.
Hartford neighborhood
South Green grew up around the small green where Main Street and Wethersfield Avenue split, just south of downtown. Large brick Italianate houses line Wethersfield Avenue, built in the 1800s for the city's wealthier families, while side streets such as Morris, Dean and Alden hold more modest homes and apartment houses. The Henry Barnard House, home of the 19th-century educator, stands here, and Armsmear, Samuel Colt's Italian villa, stands on Wethersfield Avenue.
Many of these buildings have been split into apartments over the years, and the plumbing shows every era of that work. We spend a lot of time here on steam and hot-water radiators, boiler work, supply lines that have narrowed with rust and shower valves that send scalding water when someone flushes. We work carefully around old plaster and woodwork, answer (860) 926-8723 24/7 and quote the price before work starts.

South Green housing is mostly 1860 to 1900 brick and frame buildings: big Italianate houses, multi-unit apartment houses and early 1900s apartment blocks. Most are heated by steam or hot-water boilers with cast-iron radiators, and many still have some galvanized supply pipe and cast-iron drains. Water and sewer come from the MDC. Because the buildings have been divided and updated so many times, it is common to find several generations of pipe joined together in one basement.
Steam radiators with failed air vents or poor pitch stay cold, hiss or bang as the boiler fires.
Narrowed galvanized supply lines cannot feed the top apartments when several fixtures run together.
Older shower valves in divided units cannot balance pressure, so the water spikes hot when someone else draws water.
Mixed galvanized, copper and plastic joints in one system leak at the transitions.

Most requested here
One cold room, a radiator that hisses and spits, or a puddle under a baseboard can make the whole heating system feel broken. Usually the problem sits at that...
Learn moreWhen every fix uncovers another pinhole or rusty joint, patching stops making sense. Repiping swaps the tired supply lines in your house for new ones in a...
Learn moreWhen an old boiler is cracked, rusted through or costing a fortune in repairs, a new one sized right for the house can heat better and burn less fuel. Sizing...
Learn moreWater that is hot enough to store safely is not always safe at the tap. A thermostatic mixing valve blends hot and cold so the water at the faucet stays at a...
Learn moreFAQ
Banging in a steam system usually means water is trapped in the pipes or radiators. A radiator tilted the wrong way, a sagging pipe or a boiler with the wrong water level can all cause it. We check the vents, the pitch of each radiator and the near-boiler piping, then explain what is causing the noise and quote the fix before starting.
Yes, in most cases. We plan routes through basements, closets, chases and old dumbwaiter or service spaces, and open walls only where there is no other path. Flexible PEX makes it easier to fish lines through old framing. We walk you through the plan and quote the full job before work starts, so you know which walls will be opened.
Call any hour. A plumber answers and gives you a price on site before work starts.